SCD Strand-laid grommet with aluminium ferrules
| Rope Ø | Code | W.L.L. (*) | ||
|---|---|---|---|---|
| mm | AR/T | t (1) | t (2) | t (3) |
| 6 | TF1.060.26.04 | 0,84 | 1,67 | 1,17 |
| 8 | TF1.080.26.04 | 1,48 | 2,97 | 2,08 |
| 10 | TF1.100.26.05 | 2,32 | 4,63 | 3,24 |
| 12 | TF1.120.26.05 | 3,34 | 6,69 | 4,68 |
| 14 | TF1.140.26.05 | 4,56 | 9,12 | 6,39 |
| 16 | TF1.160.26.05 | 5,93 | 11,86 | 8,30 |
| 18 | TF1.180.26.05 | 7,53 | 15,05 | 10,54 |
| 20 | TF1.200.26.05 | 9,28 | 18,55 | 12,99 |
| 22 | TF1.220.26.05 | 11,02 | 22,05 | 15,43 |
| 24 | TF1.240.26.05 | 13,12 | 26,23 | 18,36 |
| 26 | TF1.260.26.05 | 15,40 | 30,79 | 21,55 |
| 28 | TF1.280.26.07 | 17,86 | 35,73 | 25,01 |
| 30 | TF1.300.26.07 | 20,53 | 41,06 | 28,74 |
| 32 | TF1.320.26.07 | 24,27 | 48,54 | 33,98 |
| 36 | TF1.360.26.07 | 29,57 | 59,15 | 41,40 |
| 40 | TF1.400.26.07 | 36,49 | 72,99 | 51,09 |
* Safety factor 5:1
Wire ropes class 6x36 fiber core.
The minimum circumference S of the sling is 50 times the wire rope diameter.
The bend radius must be not less of 4 times the wire rope diameter.
The zone between the clamps mustnʼt be bent under lifting force.
Wire rope galvanised or in class R = 216 daN/mm2 available as options.
Nominal Length of sling
The length shall be that measured between the bearing points of the sling.
The measured length of a ferrule-secured sling shall not differ from the nominal length by more than two rope diameters or 1% of the nominal length, whichever is the greater.
The length shall be measured under no load.