Screw clamp for vertical and horizontal pulling TSH
Screw clamp for vertical and horizontal pulling TSH
| Type | Code | W.L.L. | Grip range | A | B | C | D | E | F | X | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| n° | t | A mm | mm | mm | mm | mm | mm | mm | mm | kg | |
| TSH 0,75 | 86.520.007 | 0,75 | 0÷28 | 190 | 52 | 19 | 43 | 113 | 35 | 15 | 3,1 |
| TSH 1,5 | 86.520.015 | 1,50 | 0÷32 | 255 | 65 | 26 | 75 | 130 | 44 | 40 | 7,4 |
| TSH 2,0 | 86.520.020 | 2,00 | 90÷140 | 318 | 74 | 30 | 90 | 286 | 60 | 38 | 14,8 |
| TSH 2,0 S | 86.520.021 | 2,00 | 50÷100 | 318 | 74 | 30 | 90 | 246 | 60 | 38 | 14,5 |
| TSH 3,0 | 86.520.030 | 3,00 | 0÷50 | 290 | 74 | 30 | 85 | 170 | 50 | 40 | 11,4 |
| TSH 5,0 | 86.520.050 | 5,00 | 0÷80 | 470 | 130 | 50 | 135 | 225 | 72 | 50 | 27,6 |
The screw clamp offers many possible applications. It is particularly useful for lifting, turning and pulling steel plates, girders and steel constructions.
The spindle is closed only finger tight.
Once the screw clamp is tightened and lifting begins, the pivoting pad clamping system produces a wedging action against the material, holding it securely.
The plate surface of the material must not exceed a hardness level of HRC 50